Why soldering gun

Why is this not done? What benefit does the step-down transformer have? Note: This question is not specifically about soldering guns, just any device where a step-down transformer is used with a heating element.

Obviously some of these requirements are more important than others. You cannot tolerate an iron that kills people, but waiting for it to heat up is a compromise some people will accept if it's cheap enough. The first uses a heating element made of long thin floppy wire connected directly to the mains. For isolation and strength, this is wound onto an insulating former, wrapped in an electrically insulating sleeve, and then further sleeved in a strong, earthed metal tube which heats the soldering tip.

This pattern takes a long time to bring the tip up to soldering temperature, as there are so many components to heat up through electrical insulation and additional interfaces.

The second uses a heating element made of a short thick wire, which is strong enough to be used as the soldering tip. This cannot be connected directly to mains as it's far too low a resistance, and it needs to be isolated from mains. Fortunately a transformer solves both problems with a single component.

The cost of the transformer can be traded off against the advantage of rapid tip heating. One reason is fairly simple - using a transformer provides line isolation and limits the voltage on the iron. Both of these are good things in the event of a fault. Soldering is widely used in the electronics industry for electrical connections, such as joining copper to printed circuit boards. It is also used by plumbers to join together copper pipes. The reversible effects are why it is very useful in many industries, and you even see it employed in jewellery.

TWI has been at the forefront of development and testing of electronic devices and sensors with over 40 years experience. Find out more on how we can help on electronic and sensors.

Brazing and soldering are in essence very similar in that a filler metal the braze or solder is melted between the two components to be joined. There are a number of reasons for unfilled joints following wave soldering, several of which are related to fluxing Support for SMEs.

Software Products. Go to Technical knowledge Search. Login Login. Members' Portal. What is Soldering? Also check —. What is a Soldering Gun and how is it different from a Soldering Iron? A Soldering Gun is a pistol-shaped device with a copper tip used for soldering joints. Soldering guns come with a step-down transformer but lack a high-frequency converter. Usually, soldering guns are used for large electrical appliances.

You can use it for home appliances, gadgets, radio circuits, etc. However, for other mall jobs, soldering iron is used. The heating system in most modern-day guns is usually made from chrome and nickel. It uses an electric current to heat the device at a temperature at which the solder melts. The core material in soldering guns is copper. Soldering guns work on low voltage current. This is what makes these devices effective and efficient.

Usually, the small soldering irons are used on circuit boards or light electric jobs. It is a better choice if you have to deal with soldering jobs that require minimal heat. However, different sizes can be used for other applications. So, check for the type of soldering iron before you choose one. A soldering iron is easy to work with as compared to a soldering gun. There are numerous different sizes available, which you can choose from according to your requirements.

You can also find soldering iron with different tips. However, most tips are made from iron. These are just some of the reasons why you should pick up soldering as your next hobby. In short, soldering is the process of using a soldering iron to melt solder onto another surface.

Solder melts quickly when heated, and cools almost instantly. This makes it ideal for creating bonds, especially in the world of electronics.

The below reasons were enough to convince me to start, so they should convince you too! With soldering, you can easily switch the boring white LED with something a little more colorful.